28 EN
q
PLAYBACK AND RECORDING FEATURES (cont.)
CH

Tape Position Indicator

The Tape position indicator appears
on screen when, from the stop
mode, you press FF, REW, or use
the SHUTTLE ring, or perform an
Index Search or Instant ReView. The
position of " " in relation to "B"
(Beginning) or "E" (End) shows you
where you are on the tape.
NOTES:
●

"SUPERIMPOSE" must be set to "ON", or the indicator will not

appear (

Z

pg. 30).

●

It may take a few seconds for the Tape Position Indicator to be

displayed.

COUNT 0:33:27
BE
+++

High-Speed Search

ACTIVATE HIGH-SPEEDSEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search. By releasing
SHUTTLE still picture playback is selected.
●For forward high-speed search, turn the SHUTTLE
ring all the way to the right and release it within 1
second.
●For reverse high-speed search, turn the SHUTTLE ring
all the way to the left and release it within 1 second.
OR
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:

For short searches, during playback or still, press and hold FF or

REW for over 2 seconds. When released, normal playback

resumes.

SHUTTLE
123
456
7
8
0
9
3
4¢
78
1¡
REW
FF
CH
PLAY
PLAY

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is
engaged. If tracking noise appears in the picture, you can
override this and make the adjustment manually.
ENGAGE MANUALTRACKING MODE
1
During playback, press the CH5 and ∞ buttons on the
VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.
ADJUST MANUALTRACKING
2
Press CH5 or ∞ on the VCR's front panel or remote.
Press briefly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATICTRACKING
3
Press the CH5 and ∞ buttons on the VCR's front panel
simultaneously.
●When automatic tracking is re-engaged, Video
Calibration is automatically activated.
NOTES:
●

To obtain a noiseless still picture it may be necessary to adjust

tracking in slow playback and then engage Pause.

●

Manual tracking is possible during hands-free slow-motion.

During hands-free slow-motion playback, simply press

CH5

or

∞

on the VCR's front panel or remote to adjust tracking.