JVC HR-S5400U MAKE CORRECTIONS, ENGAGE TIMER MODE

EN 45

MAKE CORRECTIONS

To change any of the settings, press OK or SHUTTLE

PLUS until the item you want to change begins

blinking. Then set as in step 5.

RETURN TO NORMAL

SCREEN

Press MENU as many times as necessary.

●Press just once to access the Auto Timer screen

(Z pg. 47).

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically.

NOTES:

●

To disengage the timer before recording starts, press TIMER

again. Pressing once more re-engages it.

●

In case of a power failure after programming, the VCR’s memory

backup keeps your selections for approximately 10 minutes.

●

If you select "PROGRAM SET" without having set the date and

time, an error message appears. Follow its instructions.

●

If you enter a start time that has already passed, "ERROR"

appears on the screen and blinks.

●

Programs that start after midnight must have the next day’s date.

●

After timer recording is completed, the VCR’s power goes off

automatically.

●

You can program the timer while a regular recording is in

progress; the on-screen menu will not be recorded.

●

If the end of tape is reached during timer recording, the

cassette is automatically ejected.

●

When timer-recording cable or satellite channels through an

external tuner, be sure to keep the cable box or satellite

receiver's power ON.

EXAMPLE

If you program the VCR to timer

record a show on December 24

on channel 40 from 12:00 noon

to 1:00 PM in SP mode, the

screen will look like this:

PROGRAM 1

DATE 12/24 WED

START 12:00 PM

STOP 1:00 PM

CHANNEL 40 SP

PRESS NUMBER KEY (O–9)

OR (5,∞), THEN (OK)

PRESS (MENU) TO END

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver

(unless "DBS RECEIVER OUT-

PUT" is set to "OFF" Z pg.23),

the BAND indication (TV or

CATV or DBS) appears to the

right of the channel number dis-

play. If the channel number that

has been entered requires that

the band be set, the BAND in-

dication starts blinking:

a- TV : To timer-record a regular TV program received

on the VCR.

b- CATV : To timer-record a cable TV program received on

the VCR, or through a cable box (unless

"CABLE BOX OUTPUT" is set to "OFF" Z pg.18).

c- DBS : To timer-record a satellite program received

through a DBS receiver.

Press CH5∞ or SHUTTLE PLUS%ﬁ to select the appropri-

ate band, then press OK.

●If "BAND" is set to "TV" at the Band screen (Z pg.15),

CATV will not be displayed on the Program screen; if it is

set to "CATV", TV will not be displayed.