38advanced features
L-2 INPUT Setting
The L-2 IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-2 INPUT to the appropriate mode depending on the output signals of the connected unit.
get to the output/input set screen Press . Move the highlight bar to
OUTPUT/INPUT SET using the PR and PR buttons and press (or E).
select mode Move the highlight bar to L-2 INPUT using the PR and PR
buttons. Press (or E) to select the desired mode:
FOR L-2 INPUT•VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.
•S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
| OUTPUT/INPUT SET |
L-1 | OUTPUT | VIDEO |
L-2 | INPUT | VIDEO |
[1] ak [MENU]: EXIT
return to normal screen Press .