advanced features 37
Editing
L-1 OUTPUT Setting
The L-1 IN/OUT connector delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-1 OUTPUT to the appropriate mode depending on the type of unit connected to the rear panel L-1 IN/OUT connector of this VCR.
get to the output/input set screen Press . Move the highlight bar to
OUTPUT/INPUT SET using the PR and PR buttons and press (or E).
select mode Move the highlight bar to L-1
| OUTPUT using the PR and PR buttons. Press | OUTPUT/INPUT SET |
| FL-1 OUTPUT | VIDEO |
| | (or | E) to select the desired mode: |
| | | |
| | | | L-2 INPUT | VIDEO |
| FOR L-1 OUTPUT | | |
| • | VIDEO : If a connected device’s input is | [1] ak | |
| | | compatible only with regular | |
| | | [MENU]: EXIT | |
| | | | |
| | | video signals, set to VIDEO. | | |
•S-VIDEO : If a connected device’s input is compatible with Y/C signals, set to
S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
return to normal screen Press .