24H Express Timer Programming
Before performing the following steps:
●Insert a cassette with the safety tab in place. The recorder will come on automatically.
●Select the appropriate colour system ( 15).
You can programme a timer recording that starts within 24 hours.
AAccess 24HR Express Timer Programme display
Push 24H EXPRESS #. “” and start time start blinking on the display panel.
Programme start time indicator
BSet programme start time
Turn the JOG dial to the left or right. Then, push the JOG dial.
“ ” and start time start blinking on the display panel.
Programme start time indicator
●One click stop of the JOG dial changes the time in
CSet programme stop time
Turn the JOG dial to the left or right. Then, push the JOG dial and channel number will start blinking.
Programme stop time indicator
●One click stop of the JOG dial changes the time in
DSet channel position
Turn the JOG dial to the left or right. Then, push the JOG dial and channel number will start blinking.
●You can cancel the setting at any time by pressing and holding the JOG dial for more than 3 seconds. Repeat from the step 2.
EEngage recorder’s timer mode
Press 24H EXPRESS #.
The recorder turns off automatically and “#” appears on the display panel.
NOTES:
●If “Err” appears on the display panel, repeat the steps again.
●When a menu screen is shown, you cannot use 24H Express Timer programming function. Press MENU to return to normal screen, and try again.
●You can use 24H Express Timer programming function also when the recorder is turned off.
●For 24H Express Timer programming function, the program overlap warning display does not appear even if some programs overlap each other.
●In case of a power failure after programming, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted).
Check, cancel and replace programmes
ADisengage timer mode
Press #, then press 1.
BAccess Program Check screen
Press ".
C Access Program screen
Press " again to check more information. Each time you press ", the next programme’s information appears.
D Cancel or replace a programme | [1] : TITLE |
Press & to cancel a programme.
To replace a programme, press the appropriate button: START
●If you do not want to edit the programme title, skip steps 5 and 6.
E Access title edit screen |
| – P1 – |
Press the number key “1”. The Title Edit |
|
|
screen appears. | 24.12 | 8:00 PR.3 |
|
|
●You can access the title edit screen only
when “PROG. NAVIGATION” is set to |
| ||||||||||
[&] : DELETE |
|
|
|
|
|
|
|
|
|
| |
“ON”. ( 15) | [Y/U] : CURSOR |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| ||||||
: OK | [PROG] : EXIT |
| |||||||||
F Enter programme title |
| – P1 – |
| ||||||||
Press the number keys and PUSH JOG e |
|
|
|
|
|
|
|
|
|
|
|
to enter characters, then press OK. For |
|
|
|
|
|
|
|
| |||
24.12 | W |
|
|
|
|
| |||||
|
|
|
|
|
|
|
| ||||
details, refer to “Entering character” on |
|
|
|
|
|
|
|
|
|
|
|
page 14. |
| ||||||||||
[&] : DELETE |
|
|
|
|
|
|
|
|
|
| |
G Return to normal screen | [Y/U] : CURSOR |
|
|
|
|
| |||||
: OK | [PROG] : EXIT |
| |||||||||
|
|
Press " as many times as necessary. If there are still some programmes remaining, go on to step 8.
HReturn to timer mode
Press #.
— 12 —