JVC LPT0800-001B Basic Recording, Activate Instant Review, Soundtrack selection

Instant Review

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

— Activate Instant Review

Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer- recorded programme. Once it's found, playback begins automatically.

●The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and “3” appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant Review is not possible while the recorder is in the Timer mode.

Soundtrack selection

Your video recorder is capable of recording three soundtracks (HI- FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

	Track
				Use
Recorder’s		On-screen
Front Panel		Display
as		HI FI		For Hi-Fi stereo tapes
		L	R
a		HI FI		For main audio of Bilingual
		L		tapes
s		HI FI		For sub audio of Bilingual
			R	tapes
NORM		NORM		For audio-dubbed tapes
a NORM s		HI FI		For audio-dubbed tapes
		NORM

NOTES:

●“as” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 9.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( 15)

Recording

Accidental erasure prevention

To prevent accidental recording on a
recorded cassette, remove its safety
tab. To record on it later, cover the
hole with adhesive tape.	Record safety tab

Basic Recording

Turn on the TV and select the video channel (or AV mode).

ALoad a cassette

Insert a cassette with the record safety tab intact.

●The recorder power comes on automatically.

●The recorder checks the tape information for Programme Navigation. For details, refer to “Navigation” ( 14).

●Select the appropriate colour system ( 15).

BChoose a programme

Press PR +/– or the number keys. Or push the JOG dial and turn it to the left or right to select the channel you wish to record.

CSet tape speed

Press p. Check the SP/LP/EP indicator on the recorder display panel to confirm the selected tape speed.

DStart recording

Press and hold 7 and 4 on the remote control, or press 7 on the recorder.

●B.E.S.T. takes place at the beginning of each first SP and first LP (or EP) recording after inserting the cassette ( 15).

During recording

Pause recording

Press 9.

●Press 4to resume recording.

●You can select channel in the recording pause mode.

Stop recording

Press 8on the remote	OR Press 0on the recorder.
control.

NOTE:

When recording in NTSC, if EP is selected, recording will always be done in the VHS mode even if an S-VHS cassette is used.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

— 8 —