JVC HR-S7500EK setup guide Make Connections, SET RECORDER’S Input Mode, SET Edit Mode

Edit From

A Camcorder

– –:– –

31

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder’s AUDIO/VIDEO OUT
	connectors to the recorder’s front panel AUDIO/
	VIDEO input connectors.
	B If the camcorder has an S-VIDEO output connector...
	... connect the camcorder’s S-VIDEO OUT and
	AUDIO OUT connectors to the recorder’s front
	panel S-VIDEO and AUDIO input connectors.
	● When using a monaural camcorder, connect its
	AUDIO OUT connector to the AUDIO L input
	connector on your recorder.

1 2 3

4 5 6

7 8 9

NUMBER "0" 0

2

4

TV PROG

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the

recorder. Refer to the camcorder’s instruction manual

for operating procedure.

SET RECORDER’S INPUT MODE

Press NUMBER key “0” and/or TV PROG to select "F-1"

for the AUDIO/VIDEO input connectors, or "S-1" for the

AUDIO/S-VIDEO input connectors, depending on the

2 connectors being used.

SET EDIT MODE

1

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

A If the camcorder has no S-VIDEO output connector...

3	See "Editing Mode Setting" on page 30.
4	START CAMCORDER
	Engage its Play mode.
5	START RECORDER
	Engage its Record mode.

B If the camcorder has an S-VIDEO output connector...

Recorder

		To rear panel PAUSE
VIDEO	AUDIO	connector
input	input

Recorder

AUDIO

S-VIDEOinput input

To rear panel PAUSE connector

Audio Cable (not provided)

Audio/Video Cable
(not provided)	Mini-Plug Cable
VIDEO OUT	(not provided)
	(JVC camcorder

only)

Camcorder

AUDIO OUT

EDIT

Player

S-Video Cable (not provided)

S-VIDEO OUT

Camcorder

AUDIO OUT

EDIT

Player

Mini-Plug Cable (not provided) (JVC camcorder only)