JVC HR-S7500EK setup guide Edit To Or From Another Video Recorder, Make Connections, Input Mode

32ADVANCEDOPERATIONS (cont.)

Edit To Or

From Another

Video

Recorder

– –:– –

You can use your video recorder as the source player or as the recording deck.

MAKE CONNECTIONS

1 Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 33.

AWhen Using Your Video Recorder As The Source Player ...

... connect its AV1 IN/OUT connector to the recording deck.

BWhen Using Your Video Recorder As The Recording Deck ...

... connect its AV2 IN or AV1 IN/OUT connector to the source player.

	SET RECORDING DECK’S
2	INPUT MODE
	Set to AUX. With this video recorder, press NUMBER
	key "0" and/or TV PROG to select “L-1” for the AV1 IN/
	OUT connector, or “L-2” for the AV2 IN connector,

1 2 3

4 5 6

7 8 9

NUMBER "0" 0

2

4

TV PROG

depending on the connector being used.

● When using the AV2 IN connector, set "AV2 SELECT"

to the appropriate mode. ☞ pg. 33

SET EDIT MODE

3 See "Editing Mode Setting" on page 30.

START SOURCE PLAYER

1

4	Engage its Play mode.
5	START RECORDING DECK
	Engage its Record mode.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (☞ pg. 34).

●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.

When Using Your Video Recorder As The Source Player ...

... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors.

When Using Your Video Recorder As The Recording Deck ...

... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to "S-1".