wWEEKLY Button enables timer recording of weekly serials. ☞ pg. 15, 17
eAUX Button selects recorder's auxiliary input mode. ☞ pg. 31
r ä Button engages
☞pg. 15, 17
tDATE +/– Button inputs date of programme for timer recording. ☞ pg. 16
yTV PROG +/– Button — same as button on recorder. ☞ pg. 12
u30 SEC Button initiates a
iAuto Tracking Button enables/disables auto tracking mode during playback ☞ pg. 22 SP/LP Button selects tape speed. ☞ pg. 12
oPlay Button — same as button on recorder. ☞ pg. 10, 11
pFast Forward [FF] Button
QPause Button — same as button on recorder. ☞ pg. 11
WOK Button enters selections made in
E% %Button initiates functions such as Index Search ☞ pg. 23,
TV
55
How To Use
The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. ☞ pg. 28, 29.
●Point the remote control toward the sensor window.
●The maximum operating distance of the remote control is about 8 m.
NOTES:
●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.
ATTENTION
The remote control can operate not only the video recorder but also some of your TV and satellite receiver's functions.
●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.
●To operate your TV, first press the TV button to set the remote control to the TV mode (☞ pg. 28).
●To operate your satellite receiver, first press the SAT button to set the remote control to the Satellite Receiver mode (☞ pg. 29).