24 EN | JVC HR-S7850EU, HR-S7851EU guide

24 EN

RECORDING

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 25) or timer recording ( pg. 30, 32, 34), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder checks the tape information for Programme Navigation. For details, refer to “Navigation” ( pg. 38).

B Choose a programme.

Press PR +/– or the number keys. Or push the JOG dial and turn it to the left or right to select the channel you wish to record.

C Set the tape speed.

Press SP/LP/EP (p). Check the SP/LP/EP indicator on the recorder’s front display panel to confirm the selected tape speed.

●In EP mode, the recording time is extended three times.

●If you record a programme in EP mode on this recorder, it is recommended to play back the EP-recorded tape on this recorder.

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 58)

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

●If “O.S.D.” is set to “ON” ( pg. 55), “MARK” blinks on the screen while an index code is being marked.

B.E.S.T. takes place at the beginning of both the first SP and the first LP (or EP) recording after inserting the cassette. ( pg. 29)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 56).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 24

JVC HR-S7850EU, HR-S7851EU specifications 24 EN

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVs Check the contents 10 ENSituate the recorder Connect the recorder to TV 8To connect to a TV with S-VIDEO/AUDIO in connectors Video Connection Auto Set Up 12 ENTurn on the recorder Select your country Perform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or e Perform Preset Download 14 ENSet the video channel Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Access the Main Menu screen Access the Country Set screenLanguage 16 EN Installing Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connections Setting satellite receivers brand and channel 18 EN TV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 20 EN Slow Motion High-Speed Turbo SearchPause during playback Activate frame-by-frame playback 22 EN Variable Speed SearchIndex Search Skip Search Next Function Memory Repeat PlaybackManual Tracking Soundtrack Selection 24 EN Instant Timer Recording ITR Tape Remaining Time Engage the Record-Pause mode 26 ENRetake Locate the start point Engage the S-VHS ET mode Receiving Stereo and Bilingual Programmes Received Playback Recording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 30 EN Set the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode Enter the programme title Express Timer Programming 32 EN To Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+ Enter the programme mode Before performing the 24 Hour Express Timer Programming34 EN Set the programme start/stop time and channel Cancel or change a programme Disengage the timer modeReturn to the timer mode Access the Programme Check screen/display Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screen Select the L-2 Select mode Recording modeProgramme Recording Before performing the following steps Navigation 38 EN Navigation Playback Programme Navigation ScreenLoad a recorded cassette Select a programme 40 EN Edit Programme TitleSelect the programme Entering Character Delete Tape DataDelete the tape data Example Enter JVC News Edit From a Camcorder 42 EN Set the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source player Access the Output/Input Set screen 44 EN Select and L-2 Input Setting Decoder connector Audio Dubbing 46 EN Engage the Audio Dubbing mode Start dubbingEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-1 Insert Editing 48 EN Engage the Insert Editing mode AV Insert EditingLocate the end point Start Editing Connecting To a Satellite Receiver Simple Connections Perfect Connections Select the input mode 52 ENConnect the decoder Set the tuner Connecting/Using a Stereo System Make connections Mode Set Access the Mode Set screenSelect the mode Select the mode setting When viewing overplayed When this function is set to ON, the timer is automaticallyDisengaged when the recorder is powered back on System to on or OFF pg On the remote control, or press 7 on the recorder Entire programme while timer-recording in SP mode56 EN Function pg , set PROG. Navigation to OFF When this function is set to ON, you can reduce Power consumption while the recorder is turned offWhen this function is set to ON, you can automatically Correct vertical vibration in the picture when playing back 58 EN About Ntsc Playback Showview System Setup Guide Program Number SetGuide Program Number Enter the Guide Program number Access the Auto Channel Set screen Tuner Set60 EN Auto Channel Set Perform Auto Channel Set View the Confirmation screenPress OK twice 62 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel 64 EN Set Stations aSet Stations B TV Station And ID List Station Name Access the Clock Set screen Clock Set66 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operation Access the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 68 EN Power 70 EN Recording Other Problems 72 EN Playback Signal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS 74 EN Memo International telephone Language code Country code