Page 14 April 4, 2002 3:24 pm
—14—

Cable Box or DBS Receiver Brand Setting

ATurn on cable box or DBS receiver
Turn on the cable box or DBS receiver using the Power button on
the unit or its Remote.
BEnter brand code
APress and hold CABLE/SAT.
BPress the Number keys to enter your cable box’s (or DBS
receiver’s) brand code.
CPress OK, and release CABLE/SAT.
COperate cable box or DBS receiver
First, press CABLE/SAT to set the Remote to cable box or DBS
receiver mode, then press one of the following buttons:
POWER1, TV PR+/–, and the Number keys.
●For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
●To change the cable box’s (or DBS receiver’s) channels, press
TVPR+/– or the Number keys. (The PR+/– button can be used
to change the VCR’s channels only.)
Changing Remote Control Code
This Remote is capable of transmitting two control codes; one set
to respond to A code control signals and another set to respond to
B code control signals. This Remote control is preset to send A
code signals because your VCR is initially set to respond to A
code signals. You can easily modify your VCR and the Remote to
respond to B code signals. When using two JVC VCRs, set two
VCRs and their Remotes to different codes, so that you can
operate these VCRs separately.
ASet remote control code for Remote
APress and hold VCR.
BPress the Number key “2”.
CPress OK, and release VCR.
●The Remote now can transmit B code control signals.
BCheck remote control code for VCR
Press and hold 4 on the VCR for more than 5seconds while the
VCR is turned off. The code currently set appears on the display
panel.
CChange code for VCR
Press any key on the Remote. The VCR now responds to B code
control signals.
●To set the Remote and the VCR back to A code control signals,
repeat the same procedure as shown above except pressing the
Number key “1” in step B of 1
11
1.

To control two VCRs with the same Remote

You can control two JVC VCRs by switching the remote control
code for the Remote between A and B (墌 step A
AA
A), keeping two
VCRs to different control codes.
●To change only the remote control code for the Remote, DO
NOT perform steps B
BB
B and C
CC
C.
CABLE BOX BRAND CODE
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
LG/GOLDSTAR
NOVAVISION
OAK
PANASONI C
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TAIHAN (DEHAN)
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
01, 05, 17
01, 17
15, 16, 17
15, 16, 17
02
01, 17
15, 16, 17
15
01, 04, 06, 11, 12, 15
10, 18, 23
15
01, 04, 06, 11, 12, 15
26
02
07
13, 14
15, 16, 17
13, 14
10, 18
01, 16, 17
05, 16, 24
02
07
05, 16, 17, 24
13, 14
05, 15, 16, 17, 24
27
05, 16, 24
01, 04, 16
01, 17
16, 17
03, 09
03, 09
DBS RECEIVER BRAND CODE
JVC (DISH Network)
ECHOSTAR (DISH Network)
RCA (DSS)
SKY
SONY (DSS)
51
51
40
52
41
– Other Functions –
+5-80(1IP3DJH7KXUVGD\$SULO30