50
ADVAN
CED
OPERATIONS
(cont.)
1–
2
1 2 3
45
6
78 9
0
1
2
REW
STOP 
3
4
4
3
FF
PAUSE
Repeat Playback
Your video recorder can automatically play back the whole tape 50 times repeatedly.
1 |
| START PLAYBACK |
| Press PLAY. | |
2 |
| ACTIVATE REPEAT PLAYBACK |
| Press PLAY and hold for over 5 seconds, then release. | |
| ● The Play indicator ( ) on the display panel blinks | |
|
| |
|
| slowly. |
|
| ● The tape plays 50 times automatically, and then stops. |
|
|
|
3 |
| STOP PLAYBACK |
| Press STOP at any time to stop playback. |
Retake
You can cut out unnecessary parts of a TV programme while you're recording it.
End of programme | Beginning of programme | ||
|
|
|
|
Programme | Unnecessary | Unnecessary | Programme |
| part | part |
|
|
|
|
|
Recorded part
Go back to end of programme to cut out unnecessary part
ENGAGE RECORD-PAUSE MODE
1 Press PAUSE during recording.
LOCATE START POINT
2 Turn the JOG dial to the left or right (or hold down REW or FF) and release it when you reach the point where you want to resume recording.
* Your recorder returns to the
RESUME RECORDING
3 Press PLAY when you wish to resume recording.
NOTE:
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
NTSC Playback
Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.
LOAD A CASSETTE
1 Insert a cassette recorded in NTSC.
START PLAYBACK
2 Press PLAY.
● "NTSC→PAL" appears on the screen for about 5 seconds.
● Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.
● The picture may roll up and down. This can be corrected using the
● The counter and tape remaining time readings will be incorrect.
● During search, still, or
● Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.
Retake function does not work during Direct Rec (☞ pg. 11).
