– Playback –
Playing back tape repeatedly (100 times)
—Repeat Play
During playback, press and hold 4 for more than 5 seconds. The play indicator ($) on the display panel starts blinking slowly. To stop playback, press 8 on the remote control or 0 on the recorder.
NOTE:
Pressing 4, 3, 5 or 9 also cancels repeat playback.
Recording
Accidental erasure prevention
To prevent accidental recording on a |
|
recorded cassette, remove its record |
|
safety tab. To record on it later, cover |
|
the hole with adhesive tape. | Record safety tab |
Locating beginning of recordings
—Index Search
Index codes are placed on the tape at the beginning of each recording when recording on this recorder.
AWhile the tape is not running, press w or eon the remote control to start search.
B To access a recording of 2 to 9 index | 6 2 | ||||||||||||
| codes away, press wor erepeatedly |
|
|
| |||||||||
| until the correct number is displayed |
|
|
| |||||||||
| on the screen (only if “O.S.D.” is set to |
|
|
| |||||||||
| “ON” ( 11)). Playback begins |
|
|
| |||||||||
| automatically when the desired |
|
|
| |||||||||
| recording is located. |
|
|
|
|
|
| ||||||
| Beginning of the |
| Current | Beginning of the | |||||||||
|
| current program |
|
|
| position on | 2nd next program | ||||||
|
| recorded |
|
| the tape | recorded | |||||||
|
| Previous |
|
|
|
|
| Next | 2nd | next | |||
|
|
|
|
|
|
| |||||||
|
| program |
|
|
|
|
| program | |||||
|
| recorded |
|
|
|
|
| recorded |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic Recording
Turn on the TV and select the video channel or AV mode.
ALoad a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
●The recorder turns on, and the counter is reset, automatically.
●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” in Function settings ( 10).
BSelect recording channel
Press PR r/t or the Number keys on the remote control or PR +/– on the recorder.
NOTE:
You can select channel in the stop mode, recording pause mode or during
CSet tape speed
Press p(SP/LP/EP). The current setting for the tape speed appears on the display panel and the screen for about 5 seconds. Press p(SP/LP/EP) again to change the setting while tape speed is displayed.
Locating beginning of timer recordings
—Instant Review
After ensuring that the recorder is turned off and that the timer mode is disengaged, press REVIEW on the remote control.
●The recorder turns on, and rewinds to the index code indicating the beginning of the last
●You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press REVIEW three times.
●The Instant Review function will also operate if the recorder is turned on.
Skipping unwanted portions
—Skip Search
Press 30 SEC 
on the remote control once to 4 times during playback. Each press initiates a
DStart recording
On the recorder, press 7. Or on the remote control, while holding 7, press 4.
NOTE:
If the tape reaches its end during recording, the recording stops and “ ” and “ $” blink on the display window. Press 0 on the recorder to eject the cassette or press 3 on the remote control to rewind the tape.
During recording
Pause recording
Press 9.
●Press 4 to resume recording.
●You can select channel in the recording pause mode.
Stop recording
Press 8 on the remote OR Press 0 on the recorder. control.
— 7 —
