Tuner Setting
IMPORTANT
Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function or if you have moved to a different area or if a new station starts broadcasting in your area.
Your recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area so that you can call them up with the PR +/– buttons without going through any vacant channels.
Manual Channel Set
Store channels that were not stored during Auto Set Up or Auto Channel Set.
AAccess Tuner Set screen
Perform step A of “Auto Channel Set”.
BAccess channel list
Press PR r/t to place the pointer next to “CH EDIT”, then press OK or e.
CSelect position
Press PR r/t to place the pointer next to an open channel position, then press OK or e.
Auto Channel Set
AAccess Main Menu screen, then Tuner
Set screen
Press MENU on the remote control. Press PR r/t to place the pointer next to “TUNER SET”, then press OK or e.
MAIN MENU
FUNCTION SET 
TUNER SET
INITIAL SET
[ / 
] 
[MENU] : EXIT
DSelect band
Press PR r/t to place the pointer next to the band of your choice, then press OK or e to initiate Manual Channel Set.
BAND SELECT | MANUAL CH SET | ||
|
|
| |
VHF L | PLEASE WAIT | ||
VHF H | |||
| |||
UHF | VHF L 300MHZ | ||
BPerform Auto Channel Set
Press PR r/t to place the pointer next to “AUTO CH SET”, then press OK or e.
CSelect TV system
Press PR r/t to place the pointer next to the appropriate TV system, then press OK or e.
●Auto Channel Set will start.
TUNER SET
CH EDIT
AUTO CH SET
[ 
/
] 
[MENU] : EXIT
TV SYSTEM SELECT
B/G
D/K
I
[ 
/
] 
[MENU] : EXIT
[ / ] | [MENU] : EXIT |
[MENU] : EXIT |
ESet desired station
The screen to the right appears when a | STORE | |
CONTINUE | ||
station is detected. | ||
|
If you do not want to store the detected
station...
Press PR r/t to place the pointer next to “CONTINUE”, then press OK or e. Channel search will resume.
If you want to store the detected station...
Press PR r/t to place the pointer next to “STORE”, then press OK or . The Channel List appears again.
| CH | FRQ | SYS | CH | FRQ | SYS |
AUTO CH SET | 01 | 150 | BG | 07 | 229 | BG |
02 | 165 | BG | 08 | 237 | BG | |
| 03 | 195 | BG | 09 | 355 | BG |
PLEASE WAIT | 04 | 205 | BG | 10 | 365 | BG |
| 05 | 213 | BG | 11 | 374 | BG |
| 06 | 221 | BG | 12 | 384 | BG |
START | FINISH | [ | / | ] |
| [ ] : DELETE |
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ – – – – – – – |
| |||||
[ | / | ] |
| : EDIT | ||
|
|
| ||||
[MENU] : EXIT
Press MENU to return to normal screen.
IMPORTANT
●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Channel Set, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. Refer to “TV System Selection — When you see the picture but the audio can’t be heard or sounds unnatural” ( 15).
●Since your recorder memorises all detected stations even if the reception condition is poor, some of those stored stations may produce a noisy picture. To delete those stations, refer to “Delete A Channel” ( 15).
e
●The blueback screen and the TV picture currently being broadcast appear alternately for 8 seconds each.
●If you want to store another channel, repeat steps C – E.
●When channel search completes for that band, the Band Select screen appears again. To set channels for other bands, select another band and start Manual Channel Set again ( step D and E).
FReturn to normal screen
Press MENU.
— 14 —
