JVC HR-V400AG, HR-V207AG, HR-V401AS Timer Recording, Recording Features, Express Timer Programing

– Recording –

Recording Features

Specifying recording length

—Instant Timer Recording (ITR)

During recording, press 7 on the recorder repeatedly until the recording length you want appears on the display panel. The record indicator () on the display panel starts blinking.

●Each time you press the button, recording length increases in 30-minute intervals (up to 6 hours).

●The recorder shuts off after recording is finished.

●To cancel an ITR, press 8 on the remote control or 0 on the recorder.

Timer Recording

Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance.

NOTES:

●If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen.

●After timer recording is completed, the recorder turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●If the tape reaches its end during recording, the recording stops and “ #“, “ “ and “ $“ on the front display panel blink. Press

# to disengage timer then press 0 on the recorder to eject the cassette or press 1 then press 3 to rewind the tape.

Watching one program while recording another

Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the PR r/t on the remote control or PR +/– buttons is recorded on the tape.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording, or timer recording), the recording will resume automatically when the power is restored to the recorder. (No setting is required for this function.)

NOTE:

If a power outage exceed the recorder’s memory backup time, Recording Resume Function does not work.

Express Timer Programing

●Remember, the clock must be set before you can program the timer.

●Load a cassette with the record safety tab intact. The recorder turns on, and the counter is reset, automatically.

●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” in Function settings. ( 10)

2

4

A

2

3

APress PROG on the remote control to access the Program screen.

B Press START	/ (number keys “1”				– P1 –
and/or “4”), STOP /		(number		START			STOP
keys “2” and/or “5”), DATE /				21:00			–:– –
								SP
(number keys “3” and/or “6”) or PR
				DATE		TV PROG
/ repeatedly to enter the start
				– –.– –				– –
time, stop time, date or channel.
			[+/–]
● Press and hold START		/	[PROG] : EXIT
(number keys “1” and/or “4”) or
STOP /	(number keys “2” and/or “5”) to increase the
time in 30-minute intervals.

●To set the tape speed, press p(SP/LP/EP).

●To timer-record daily (Monday–Friday) or weekly serials, press DAILY (number key 8) or WEEKLY (number key 9). Pressing the button again makes the “DAILY” or “WEEKLY” display disappear.

CPress OK or PROG.

●If “PROGRAM OVERLAPPED” appears, see “Program overlap warning display” ( 9).

DPress #. The recorder turns off automatically and “#” is displayed on the display panel.

— 8 —