Quantum Data 801GC, 801GF, 801GX manual Scan fields per frame, Sdly, Sequence step DeLaY, 159

SCAN	SCAN fields per frame
Classification:	Format parameter setting
Command Syntax:	SCAN <fields>
Limits:	<fields>
	1 = progressive (non-interlaced)
	2 = interlaced
Query Syntax:	SCAN?
Query Response:	<fields>
Description:	The SCAN command establishes the number of fields scanned
	per frame. Set to one (1) for progressive (non-interlaced) scan
	and two (2) for interlaced scan. The SCAN? query returns the
	current setting of SCAN.

Other Required Cmds: The FMTU command instructs the generator to use the new setting. The ALLU command updates hardware to the new setting

and redraws the test image.
Example: S C A N	/ /	S e l e c t	i n t e r l a c e i n b u f f e r
F M T U	/ / U p d a t e		h a r d w a r e t o c u r r e n t
	/ /	b u f f e r c o n t e n t s

SDLY	Sequence step DeLaY
Classification:	Sequence parameter setting
Command Syntax:	SDLY <delay>
Limits:	<delay> Delay time in seconds as a floating point number
	min = 0.0 seconds
	max = 1.70E38 seconds (infinity for all practical purposes)
Query Syntax:	SDLY?
Query Response:	<delay>
Description:	The SDLY command sets how long a sequence step will pause
	before advancing to the next step in the Auto run mode. A
	sequence step will use the last value set by the SDLY command.
	The SDLY? query returns the current setting of SDLY.
Other Required Cmds:	SMOD setting must be equal to three (3) in order for the SDLY
	setting to have any affect on sequence operation.
Example:	S D L Y 5 . 0	/ /	S e t d e l a y t o f i v e s e c o n d s
	/ /	p e r	s t e p

6-159