Quantum Data 801GC, 801GF, 801GX 9470 Can’t change Eprom contents, Bad location for format yank

9470 Can’t change EPROM contents

An attempt was made to insert a format using the FMTI command into an EPROM format memory location.

■Use a range of 1 through 300 as the insertion location for formats in nonvolatile RAM.

9471 Bad location for format yank

This occurs when you try to remove (yank) one or more formats from invalid format memory locations using the FMTY command.

■All formats to be removed from nonvolatile RAM must be in the range of memory locations 1 through 300.

9472 Can’t change EPROM contents

This occurs when you try to remove (yank) one or more formats from EPROM format memory locations using the FMTY command.

■Only formats in memory locations 1 through 300 can be removed.

9475 Can’t change EPROM contents

One or more EPROM format locations was given as the destination location for the FMTD command.

■Use a range of 1 through 300 as the destiny location to copy formats to nonvolatile RAM.

9477 Error duplicating formats

The <first> memory location parameter used with the FMTD command is greater than the <last> memory location parameter.

■Make the <first> memory location parameter less than or equal to the <last> memory location parameter.

9480 Format data missing

The FMTR command tried to read a format from an empty format storage location.

■Use a memory location known to contain a format or use the FMTL command to load a format by name.

8-25