Quantum Data 801GC, 801GF, 801GX manual Format, Dss

Format

Description	A listing of the data contained in any format. This
	pattern works best at display resolutions of at least
	640 pixel by 480 lines. It’s quite similar to the
	format editor’s GUI screen.
		Name: MDA_m7						Pixel Rate:
		Location:	13			16.257 MHz				61.512 ns
		Entry Units:	Time
					Horizontal				Vertical
		Rate:		18.432	KHz*			49.816	Hz
		Active:		720	pixels	44.289	∝ s*	350	lines	18.989	ms*
		Blank:		162	pixels	9.965	∝ s	20	lines	1.085	ms
		Period:		882	pixels	54.253	∝ s*	370	lines	20.074	ms*
		Physical size:		11.811	inches	300.000	mm	8.858	inches	225.000	mm
		Pulse delay:		9	pixels	0.554	∝ s	0	lines	0.000	ms
		Pulse width:		144	pixels	8.858	∝ s	16	lines	0.868	ms
		EQ Before:						0	lines
		EQ After:						0	lines
		Scan:		Progressive (non-interlace)
		ACS kind:		none					On: -G-
		DCS kind:		American 0Red
		DSS kind:		American separate					DS Polarity: H+ V- C+
		Sync select:		DSS					DS Gate: Hon Von Con
		Video kind:		2-bit mono					Pedestal: OFF 7.5 IRE
		Video bias:		0.000 volts blank minus ground
		Video swing:		0.714 volts white minus blank
		Sync swing:		0.286 volts blank minus sync
		Gamma:		OFF 2.200
		Display code expected:			E Code read F
Test	View a format’s parameter settings
Purpose	To verify programmed values or choose a format
Method	The main image lists the settings of the format
	that’s driving the display. The secondary image
	can be used to list the contents of any stored
	format.

4-28 Chapter 4: Built-In Images Model 801GC, 801GF & 801GX¥Rev. X1