Quantum Data 801GC, 801GF, 801GX manual Image Knob Directory Editor, SMPTE133

Image Knob Directory Editor

Going through all of the available images with the Image knob can be time consuming. This is particu- larly true if you regularly use only a few images that may be scattered over the knob locations. The 801G* can be set up to show only the images you want, in the order you want, when the “Image” knob is turned. The 801G* maintains a list of these im- ages in non-volatile memory. This list can be ed- ited. You will need to edit the list if you wish to use the knob with images you have created. A typical image list editor screen is shown here. The actual editor screen uses mostly lit text on a black back- ground.

Image List		Available Files
	Flat		ColorBar
	ColorBar		GrayBar
	Linearty		Raster
	CGA_m14		BriteBox
	Dot_24		Citizen
	Raster		Dot_10
	GrayBar		Dot_12
	SMPTE133		Dot_24
			Hatch_10
			Hatch_12
			Hatch_24
			Grill_44
			Grill_33
			Grill_22
			Grill_11
			Linearty
			SMPTE133

⁄ƒƒƒƒƒƒø ⁄ƒƒƒƒƒƒƒƒø⁄ƒƒƒƒƒƒƒƒø⁄ƒƒƒƒƒƒƒƒø ⁄ƒƒƒƒƒƒƒƒø⁄ƒƒƒƒƒƒƒƒø⁄ƒƒƒƒƒƒƒƒø ⁄ƒƒƒƒƒƒƒø

≥ Done ≥ ≥ Move ≥≥≥≥ Delete ≥ ≥ ≥≥ Insert ≥≥ Remove ≥ ≥ Modify≥ ¿ƒƒƒƒƒƒŸ ¿ƒƒƒƒƒƒƒƒŸ¿ƒƒƒƒƒƒƒƒŸ¿ƒƒƒƒƒƒƒƒŸ ¿ƒƒƒƒƒƒƒƒŸ¿ƒƒƒƒƒƒƒƒŸ¿ƒƒƒƒƒƒƒƒŸ ¿ƒƒƒƒƒƒƒŸ

The left hand side of the screen shows the current contents of the image knob directory. The images appear in the order that they are selected by the “Image” knob during normal operation.

While editing, the “Format” knob moves a selection box through the left hand list. The list will scroll if it can not fit on the screen.

The right hand side shows all of the available im- ages. The built-in images are at the top of the list. The built-in images are followed by a factory de-

6-21