Quantum Data 801GC, 801GF, 801GX manual Imga, Imgb, Imge

IMGA	IMaGe save As
Classification:	Image memory management
Command Syntax:	IMGA <name>
Limits:	<name> = a valid MS-DOS filename
	(8 characters minus any extension)
Query Syntax:	None
Description:	The IMGA command saves the current contents of the image
	edit buffer using the given name.
Other Required Cmds:	None
Example:	I M G A M Y _ I M G / / S a v e w i t h t h e n a m e
	/ / " M Y _ I M G "

IMGB	IMaGe editing Begin
Classification:	Image editor control
Command Syntax:	IMGB
Query Syntax:	None
Description:	The IMGB command marks the beginning of an image editing
	session.
Other Required Cmds:	Either an IMGL command to load an existing image or an IMGN
	command to create a new image. IMGE when ending the editing
	session.
Example:	I M G N / / I n i t i a l i z e i m a g e e d i t b u f f e r
	I M G B / / S t a r t i m a g e e d i t i n g s e s s i o n
	/ / O n e o r m o r e i m a g e e d i t i n g
	/ / c o m m a n d s
	/ / . . .
	I M G E / / E n d i m a g e e d i t i n g s e s s i o n

IMGE	IMaGe editing End
Classification:	Image editor control
Command Syntax:	IMGE
Query Syntax:	None
Description:	The IMGE command marks the end of an image editing session.
Other Required Cmds:	IMGB when starting the editing session. Use IMGA or IMGS to
	save changes.
Example:	I M G B / / S t a r t i m a g e e d i t i n g s e s s i o n
	/ / O n e o r m o r e i m a g e e d i t i n g
	/ / c o m m a n d s
	/ / . . .
	I M G A M Y I M G _ 0 2 / / S a v e e d i t e d i m a g e a s
	/ / M Y I M G _ 0 2
	I M G E / / E n d i m a g e e d i t i n g s e s s i o n

6-140 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A