Quantum Data 801GC, 801GF, 801GX Htot, Horizontal TOTal pixels per line, Idn, IDeNtification, 139

HTOT Horizontal TOTal pixels per line

Classification: Format parameter setting

Command Syntax: HTOT <pixels>

Limits: <pixels> min 801GP = 2

801GC, GF, GX = 144 801GC-ISA, GF-ISA = 144 max

801GP = 2048 801GC, GX = 4096 801GC-ISA = 4096 801GF, 801GF-ISA = 65,536

Query Syntax:	HTOT?
Query Response:	<pixels>
Description:	The HTOT command establishes the total number of pixels per
	horizontal line. The HTOT? query returns the current setting of
	HTOT.
	The pixel rate is equal to the product of HRAT multiplied by
	HTOT.
	Note – The current version of the firmware does not allow you
	to directly enter a specific pixel rate when setting up a format.
	If your test specifications call for a specific pixel or dot clock
	rate, enter suitable values for HRAT and HTOT to give you
	the desired pixel rate.

Other Required Cmds: The FMTU command instructs the generator to use the new setting. The ALLU command updates hardware to the new setting

and redraws the test image.
Example: H T O T	8 0 0 / / S e t t o t a l t o 8 0 0
F M T U	/ /	U p d a t e h a r d w a r e t o c u r r e n t
	/ /	b u f f e r c o n t e n t s

*IDN	IDeNtification
Classification:	Miscellaneous system parameter
Command Syntax:	None
Query Syntax:	*IDN?
Query Response: QuantumData,801GX,0,<firmware version #>
Description:	The *IDN? query returns an equipment identification string
	formatted per IEEE-488.2 standards.
Other Required Cmds:	None
Example:	* I D N ? / / R e t u r n i n f o r m a t i o n a b o u t
	/ / g e n e r a t o r

6-139