Quantum Data 801GC, 801GF, 801GX manual Outg, OUTputs Gate, Draw an Oval, 154

OUTG	OUTputs Gate
Classification:	System parameter setting
Command Syntax:	OUTG <mode>
Limits:	<mode>
	0 = OFF
	1 = ON
Query Syntax:	OUTG?
Query Response:	<mode>
Description:	The OUTG command gates all video and sync outputs of the
	generator ON and OFF. Gating the outputs OFF forces all outputs
	to be turned off. Gating the outputs ON turns on all outputs
	whose individual gating settings are turned ON. The OUTG?
	query returns the current status of the outputs of the generator.
Other Required Cmds:	None
Example:	O U T G 0 / / D i s a b l e a l l o u t p u t s

OVAL	draw an OVAL
Classification:	Custom image primitive
Command Syntax:	OVAL <color> <width> <height> <x> <y> <fill pattern>
Limits:	<color> = available colors
	<width> = total number of horizontal pixels
	<height> = total number of lines
	<x> = positive integer number
	<y> = positive integer number
	<fill pattern> = available fill paterns
Query Syntax:	None
Description:	Draws an oval whose axes are parallel to the vertical and
	horizontal axes of displayed video. The size and position of the
	oval are defined by its framing rectangle. The framing rectangle
	is a rectangle whose sides are both tangent to the oval at four
	points and are parallel to the vertical and horizontal axis of
	video. It’s not drawn as part of the primitive.
	Oval uses six (6) parameters. The first is color. The next two are
	the pixel width and height of the framing rectangle. The fourth
	and fifth parameters are the X and Y coordinates for the top
	left-hand corner of the framing rectangle. The last parameter is
	the fill.

Other Required Cmds: The FMTU command instructs the generator to use the new setting. The ALLU command updates hardware to the new setting and redraws the test image.

Example: O V A L r e d 2 4 0 1 5 0 2 0 1 0 G r a y P a t 0 / / D r a w / / a r e d o v a l 2 4 0 p i x e l s w i d e b y / / 1 5 0 p i x e l s h i g h . S t a r t f r a m i n g / / r e c t a n g l e a t X = 2 0 , Y = 1 0 . F i l l = / / n o n e

6-154 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A