Quantum Data 801GC, 801GF, 801GX Equb, EQUalization interval Before vertical sync, Fmta, 119

EQUB	EQUalization interval Before vertical sync
	pulse
Classification:	Format parameter setting
Command Syntax:	EQUB <lines>
Limits:	<lines>
	min = 0
	max = number of lines after video and before vertical sync
Query Syntax:	EQUB?
Query Response:	<lines>
Description:	The EQUB command establishes the width of the equalization
	interval before the vertical sync pulse in each field whenever a
	serrated & equalized sync type is selected via either ASCT or
	DSCT commands and selected via the SSST command. If the
	type specified for the selected sync signal is one of the CCIR
	types, then the actual equalization interval output by the
	generator will be 0.5 lines shorter than the whole number
	specified. The EQUB? query returns the current setting of EQUB.

Other Required Cmds: The FMTU command instructs the generator to use the new setting. The ALLU command updates hardware to the new setting

and redraws the test image.
Example: E Q U B	3 / / S e t p r e - e q u a l i z a t i o n t o 3
	/ / l i n e s i n b u f f e r
F M T U	/ / U p d a t e h a r d w a r e t o c u r r e n t
	/ / b u f f e r c o n t e n t s

FMTA	ForMaT save As
Classification:	Format memory management
Command Syntax:	FMTA <name>
Limits:	<name> = a valid MS-DOS filename
	(8 characters minus any extension)
Query Syntax:	None
Description:	The FMTA command saves the current contents of the format
	edit buffer using the given name.
Other Required Cmds:	None
Example:	F M T A M Y _ F M T / / S a v e w i t h t h e n a m e
	/ / " M Y _ F M T "

6-119