Quantum Data 801GC, 801GF, 801GX manual Analog Video Signal Type, Dvst ≠, Avst?

AVST	Analog Video Signal Type
Classification:	Format parameter setting
Command Syntax:	AVST <type>
Limits:	<type>
	0=none
	1=Analog Y (grayscale)
	2=Analog RGB (color)
	3=Analog TV Y (grayscale)
	4=Analog TV EYC (color subcarrier)
	5=Analog YPrPb (color difference)
	Must be zero (0) when any digital video type is selected
	(DVST ≠	0).
Query Syntax:	AVST?
Query Response:	<type>
Description:	The AVST command establishes the type of signal that appears
	on the analog video outputs of the generator. The AVST? query
	returns the current setting of AVST.
	Note – Certain AVST types may not be supported by all
	generators in the 801G series.
Other Required Cmds:	DVST must be set to zero when analog video is used. The FMTU
	command instructs the generator to use the new setting. The
	ALLU command updates hardware to the new setting and redraws
	the test image.
Example:	D V S T 0	/ / D i s a b l e d i g i t a l v i d e o
	A V S T 2 / / S e l e c t R G B c o m p o n e n t c o l o r
	/ / v i d e o

A L L U / / U p d a t e h a r d w a r e a n d r e d r a w t e s t / / i m a g e

6-98 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A