Quantum Data 801GC, 801GF, 801GX manual Usiz, Unit of measure used for physical SIZes, Verf, 170

USIZ	Unit of measure used for physical SIZes
Classification:	Format and System parameter setting
Command Syntax:	USIZ <units>
Limits:	<units>
	0 = sizes not given (use default)
	1 = inches
	2 = mm
Query Syntax:	USIZ?
Query Response:	<units>
Description:	The USIZ command sets the units of measure assumed by HSIZ
	and VSIZ commands to establish the physical size of the image
	that appears on the CRT (context sensitive - see FMTB and FMTE).
	The USIZ? query returns the current setting of USIZ.
	Note – Changing the USIZ parameter between inches and
	millimeters will convert the current HSIZ and VSIZ values to
	match the new unit of measure. For example, if USIZ is in
	inches and the current HSIZ is 10 (inches), changing USIZ from
	inches to mm will change HSIZ to 25.4 (mm). The USIZ command
	should be sent before specifying physical sizes in format
	command files.
Other Required Cmds:	The ALLU command updates hardware to the new setting and
	redraws the test image, taking the new units into account.
Example:	F M T B / / B e g i n e d i t i n g s e s s i o n
	/ / O n e o r m o r e f o r m a t e d i t i n g
	/ / c o m m a n d s
	/ / . . .
	U S I Z 1 / / S e l e c t i n c h e s a s u n i t o f
	/ / m e a s u r e i n b u f f e r
	H S I Z 1 0 . 4 / / S e t w i d t h t o 1 0 . 4 i n
	/ / b u f f e r
	V S I Z 7 . 8 / / S e t h e i g h t t o 7 . 8 i n b u f f e r
	A L L U / / T e s t t h e n e w s e t t i n g s
	/ / O n e o r m o r e f o r m a t e d i t i n g
	/ / c o m m a n d s
	/ / . . .
	F M T E / / E n d e d i t i n g s e s s i o n

VERF	VERsion of Firmware
Classification:	Miscellaneous system parameter
Command Syntax:	None
Query Syntax:	VERF?
Query Response:	<version>
Description:	The VERF? query returns the firmware revision number.
Other Required Cmds:	None
Example:	V E R F ? / / R e t u r n f i r m w a r e r e v i s i o n n u m b e r

6-170 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A