Quantum Data 801GC, 801GF, 801GX manual Img ed running, Nothing to save, Invalid gray level

3005 Img ed running

This occurs during IMGB, IMGN, or IMGE commands. It happens when you are creating a custom image with the Custom Image Editor on a stand-alone generator and, during that session, you begin an image editing session via the IMGB or IMGN commands.

■Do not use the IMGB or IMGN commands while using GUI.

3006 Nothing to save

This occurs during IMGA or IMGS commands. It happens when you try to save the contents of the image editing register when none is initialized.

■You must use IMGN before IMGS or IMGA.

3010 Invalid Lookup Table (LUT) level (8-bit DAC)

The 801GX, 801GC, 801GC-ISA and 801GP generators do not support analog video DAC settings beyond the range of 0 through 255.

■The levels used with the FRGB command must be between 0 and 255 when used on the generator models listed above.

3015 Invalid Lookup Table (LUT) level (10-bit DAC)

The 801GF and 801GF-ISA generators do not support analog video DAC settings beyond the range of 0 through 1023.

■The levels used with the FRGB command must be between 0 and 1023 when used on the generator models listed above.

3050 Invalid gray level

The generator does not support gray level percentages beyond the range of 0 through 100. This error should never occur under normal operation.

■Please contact Quantum Data's technical support department if you get this message.

8-19