12 MultiModemISI Hybrid Series, ISIHP-2S/2U
Hardware Installation
Installing the ISIHP-2S/2U in Windows NT 3.51/4.0
The following procedure describes how to install the ISIHP-2S/2U in
a system operating Microsoft Windows NT 3.51 or 4.0 for use with
Remote Access Service (RAS) server and other communications/fax
server type applications. These procedures refer to both 3.51 and 4.0.
1. Install the ISIHP-2S/2U in an available PCI slot as described in the
installation section of this manual.
2. Turn on the computer.
3. Click Start, Settings, Control Panel, and then double-click
Network. In the Network dialog box, click the Adapters tab. Then
click Add.
4. The Select Network Adapter dialog box appears. Click Have
Disk.