Quantum Data 801GC, 801GF, 801GX manual Invalid delay time in sequence, Font index out of range

4008 Invalid delay time in sequence

A command file containing a sequence step delay was downloaded to the generator.

■Only use delay times (in seconds) that correspond to the list of available delays.

4010 Font index out of range

You tried to use a font at an invalid index.

4020 No font present at given index

You tried to access a font at a valid index but the specified index is empty because of a previous delete.

4030 Invalid font location

You tried to install a font that has not been transferred to memory.

4576 Can’t convert to inches, not valid units

The format unit (inches or millimeters) is unknown because a new format was not initialized before it was created. Conversion between the format’s unit and the user’s preference fails.

■Always use the FMTN command before editing a new format.

4579 Can’t convert to mm, not valid units

The format unit (inches or millimeters) is unknown because a new format was not initialized before it was created. Conversion between the format’s unit and the user’s preference fails.

■Always use the FMTN command before editing a new format.

5002 No directory memory

This occurs during DIRN and NAMI commands when there’s an insufficient amount of managed memory for the buffer request.

■Save all used edit buffers and issue FMTN, IMGN, and/or DIRN. This clears extra memory being used by these buffers.

8-21