Quantum Data 801GC, 801GF, 801GX manual Horizontal sync pulse width must be even for

2191 Horizontal sync pulse width must be even for

HDTV

The generator does not support horizontal sync pulse widths (in pixels) that cannot be evenly divided by two (2) for HDTV video types.

■Make the sync pulse width (in pixels) evenly divisible by 2.

■Change the video signal type.

2200 Horizontal pulse width too large

The generator does not support a horizontal sync pulse width greater than the number of blanked pixels per horizontal scan line.

■Decrease the horizontal pulse width.

■Increase the horizontal period (in pixels).

■Decrease the number of active pixels per line.

2201 Horizontal sync pulse delay must be even at current pixel rate

The generator does not support horizontal sync pulse delay (in pixels) that cannot be evenly divided by two (2) at the given pixel rate.

■Make the sync pulse width (in pixels) evenly divisible by 2.

■Decrease the pixel rate.

2230 Horizontal pulse delay extends sync beyond blanking

The generator does not support horizontal sync pulses with any portion of the pulse occurring outside of the horizontal blanking period.

■Decrease the horizontal pulse width.

■Decrease the horizontal pulse delay.

■Increase the horizontal period (in pixels).

■Decrease the number of active pixels per line.

2240 Vertical total too small

There must be at least a total of 2 horizontal scan lines per frame with non-interlaced mode.

■Increase the vertical period so that it’s greater than 1 line.

8-10 Chapter 8: Error Messages Model 801GC, 801GF & 801GX¥Rev. A