Quantum Data 801GC, 801GF, 801GX manual Asss, Analog Sync Signal Swing, Avcm

ASSS	Analog Sync Signal Swing
Classification:	Format parameter setting
Command Syntax:	ASSS <level>
Limits:	<level> (floating point accepted)
	min = 0.000 volts
	max = 0.307 volts
Query Syntax:	ASSS?
Query Response:	<level>
Description:	The ASSS command sets the maximum peak-to-peak swing for
	any composite sync that’s added to any of the three analog
	video channels. The actual peak-to-peak swing of the analog
	sync signals at the output connectors equals the product of ASSS
	multiplied by ASSC. The ASSS? query returns the current setting
	of ASSS.
Other Required Cmds:	One or more ASSG modes must be set to ON and the SSST type
	must be 4, 5, 6 or 7 to output analog sync. The FMTU command
	instructs the generator to use the new setting. The ALLU
	command updates hardware to the new setting and redraws
	the test image.
Example:	A S S S 0 . 2 8 6	/ / S e t s y n c s w i n g t o 2 8 6 m V
	/ / i n	b u f f e r
	F M T U / / U p d a t e h a r d w a r e t o c u r r e n t
	/ / b u f f e r c o n t e n t s

AVCM	Analog Video Calibration Method
Classification:	Format parameter setting
Command Syntax:	AVCM <type>
Limits:	<type>
	0 = Interpolate
	1 = Measure Interpolate
	2 = Measure Set Absolute
	3 = Test Levels
Query Syntax:	AVCM?
Query Response:	<type>
Description:	The AVCM command determines how the generator tests and
	calibrates its analog video outputs. The AVCM? query returns
	the current setting of AVCM.
Other Required Cmds:
Example:	A V C M 1 / / S e l e c t M e a s u r e I n t e r p o l a t e
	/ / t y p e o f s e l f c a l

6-92 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A