Quantum Data 801GC, 801GF, 801GX manual Sequence Step number, 167, Step?

STEP	sequence STEP number
Classification:	Sequence parameter setting
Command Syntax:	STEP <step#>
Limits:	<step>
	min = 1
	max = See description
Query Syntax:	STEP?
Query Response:	<step>
Description:	The STEP command selects a step in the sequence edit buffer.
	It is context sensitive. While editing a sequence (between SEQB
	and SEQE commands), the STEP command selects a step to be
	edited. Outside of the sequence editor and while running a
	sequence, the command selects a step to be executed.
	When running a sequence, the maximum limit for the step number
	is the number of the last step in the sequence. When editing a
	sequence to be saved in memory, the maximum number of steps
	will depend upon the generator firmware version as well as
	how many other sequences are stored in sequence memory and
	how many steps they contain. Generators with firmware versions
	below 2.605 can store a total of about 400 sequence steps.
	Generators with firmware versions greater than or equal to 2.605
	can store a total of about 1280 sequence steps. The STEP? query
	returns the current setting of STEP.
Other Required Cmds:	When running a sequence, the SEQU command must be executed
	after the STEP command to load the format and display the
	image selected in the step.
Example:	S T E P 5 / / S e l e c t f i f t h s t e p i n c u r r e n t
	/ / s e q u e n c e
	S E Q U / / L o a d f o r m a t a n d d r a w i m a g e i n
	/ / c u r r e n t s t e p

6-167