22basic features

Check the Results

VPS/PDC

-P2-

PLUSCODE NO.

 

56781234

START

-P1-

STOP

21:00

22:00

 

 

SP

 

VPS/PDC OFF

DATE

 

 

TV PROG

25.12

 

 

1

 

 

 

BBC1

k: OK

 

 

[0]: SAT

Press . The VIDEO Plus+ Program screen appears.

Make sure that the preset number displayed is the one that you want. If it is incorrect, the wrong programme will be recorded.

AUDIO – –:– –

3

VPS/PDC

0000

5

?

30 SEC

 

PR

 

 

PR

3

 

PR

 

 

 

i

 

 

2

4

 

ENTER

 

LP00000-000

 

VCR/TV

i

ENTER

errors If the PlusCode number you entered is invalid, ERROR appears on the TV screen.

set channel position number Make sure the channel position you wish to record is displayed. If “TV PROG” displays “– –”, set the Channel Position number correctly. Press PR or PR button to input the channel position number on

which your recorder receivers the station. Then press (or E).

set tape speed You can change the tape speed between Standard Play (SP) and Long Play (LP) by pressing /.

set pdc mode Press PDC (number key 7) to change between ON and OFF. Programme Delivery Control (PDC) is a service designed to ensure that timer recording still works in the event of a change in time of broadcast. If you set PDC to ON, your VCR will be turned on not by its own timer but by a signal transmitted by the broadcaster. This means that if an advertised programme is delayed, your VCR will still record it properly.

change stop time Press STOP + / – (number key 2 and 5). You can compensate for anticipated changes in schedule using this method.

serial recording To set the VCR to record the same programme on a daily (Monday-Friday) or weekly basis, press DAILY (number key 8) or WEEKLY (number key 9) to turn the function on. Pressing the same key again turns the function off. You will see your selection appear on the TV screen.

capacity You can set this VCR to timer record up to eight programmes. If you try to enter a ninth, PROGRAM FULL appears on the screen.

satellite receiver users To timer-record a satellite broadcast using the VIDEO Plus+ system:

•Perform ‘Satellite Receiver Control Settings’ (￿ pg. 36).

•You cannot set PDC to ON.

•You cannot timer-record the satellite broadcast received on the channel position ‘0’ by the satellite receiver.

•Leave the satellite receiver’s power on.

Return to Normal Screen

Press por . PROGRAM COMPLETED appears on the TV screen for about 5 seconds, then the normal TV screen appears. If the timer programme is overlapped with another one that was already set, PROGRAM OVERLAPPED appears on the TV screen. (￿ pg. 27)