10three-step quick start

Three-Step Quick Start

For Step, be sure to perform either of the methods: Auto Setup or Preset Download.

Auto Setup

before you start

Check that the VCR is turned off and no cassette is inserted

Load the battery into the Remote Control

START AUTO SETUP

Press the obutton. If ‘Auto’ appears on the display panel, press OK button (or).

what will happen? The display panel on the front of the VCR will show the word ‘Auto’. Do not press any button on the VCR or the Remote Control. note If you have connected both the RF cable and the fully-wired 21-pin SCART cable, and if your TV offers T-V Link, etc., and the TV is turned on, the VCR automatically performs the Preset Download (￿pg. 11) even if you select ‘Auto’ for Auto Setup function.

Refer to the Remote Control diagram on pages 6–7

Unless indicated otherwise, use the buttons on the Remote Control

Check that the connection is completed

Turn on the TV

 

 

The VCR is automatically setting up the tuner

 

SAT

 

channels, clock, the VIDEO Plus+ assigned Guide

VCR

 

 

REVIEW

Program numbers and the video channel. This only

 

 

happens the first time that the VCR is turned on.

Auto Setup is running: don’t touch any buttons

rf and scart connection If you have chosen to connect the VCR to the TV with both the RF Cable

AUTO SET

and a 21-pin SCART Cable (not provided) and the

PLEASE WAIT

TV set is in its AV mode (see the TV manual), you

 

 

will see the following information displayed on

 

your TV screen:

 

 

 

[MENU]: EXIT

Your TV screen during Auto Setup if SCART is used

SELECT THE VIDEO CHANNEL

 

When Auto Setup has finished, you will see the following display panel on your VCR:

rf cable only If you have only used the RF

SAT

Cable to connect the VCR to the TV, you will

VCR

 

 

see this display. The number is the channel on

REVIEW

 

the TV that the Auto Setup has chosen to be the

 

video channel. In the example, we have presumed that channel 52 is vacant and

– –:– –

have set the VCR to 52:

 

Now tune the TV set to channel 52 (refer to TV manual if

 

necessary); you should see two vertical white bars appear

 

on the TV screen. If the bars do not appear or are not

 

clear, choose another vacant channel pressing PR +/--on

 

the Remote Control and try again. If you cannot obtain

 

the vertical white bars on any channel between 22 and 69,

 

consult your local JVC dealer.

 

rf and scart connection If you have chosen

SAT

to connect the VCR to the TV with both the RF

VCR

Cable and a 21-pin SCART Cable (not provided),

REVIEW

you need to press PR --

on the Remote Control

 

until the figure reads ‘– –’. This is because you will use the TV in AV mode to view video pictures and therefore do not need a dedicated video channel.