JVC HR-VP473U, HR-VP673U manual Recording Features, Engage TV Mode, Select Channel for Viewing

28EN

PLAYBACKANDRECORDINGFEATURES(cont.)

Recording Features

V/VCR		OSD
1	2	3
		2
4	5	6
7	8	9
C.RESET	0	4

Record One Program While Watching Another

1	ENGAGE TV MODE
	During recording...
	Press TV/VCR. The VCR's VCR indicator goes out. (If
	you are using the RF connection (	pg. 6) to view
	the output from your VCR, the TV broadcast being
	recorded disappears.)
	If you are using the AV connection (	pg. 6) to view
	the output from your VCR, change the TV's input
	mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2 Use the TV’s channel selector to set the channel you want to watch.

1

3

Display Elapsed Recording Time

1	RESET COUNTER TO ZERO
	Before recording starts, press C.RESET. The counter
	resets to zero and displays the exact elapsed time as the
	tape runs.
	DISPLAY ELAPSED TIME ON
2	SCREEN
	During recording, press OSD at any time to see the
	elapsed time.
	All indications corresponding to the current status of the
	VCR are displayed for 5 seconds. The counter display
	remains on the screen indicating the elapsed time.
	Press OSD again to remove the display.
	Make sure "SUPERIMPOSE" is set to "ON" ( pg. 23).
	The indications are not recorded.