JVC HR-VP473U VCR Plus+ Timer Programming, Input Receiving Channel Number, EN Timer Recording

GUIDE CHANNEL SET

GUIDE CH: 12

VCR CH : –––

PRESS NUMBER KEY (0–9)

OR (5,°), THEN (OK)

PRESS (PROG.) TO END

30ENTIMERRECORDING

VCR Plus+

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

[VP673U]

[VP473U]

1	2	3
			2
4	5	6	NUMBER
7	8	9
CANCEL	0		4

PROG. 1

OK

SHUTTLE PLUS

Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer programming up to 8 shows as far as a year in advance. ( pg. 30 or 34)

The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCode programming numbers are the numbers next to the programs in most TV listing.)

1	LOAD A CASSETTE
	Make sure the record safety tab is present.
	The VCR’s power comes on automatically.
2	ACCESS VCR PLUS+ SCREEN
	Press PROG. on the		VCR PLUS+
	remote control.
	The clock must be set in
	order to access the VCR
	Plus+ screen. If you
			PRESS NUMBER KEY (0–9)
	haven’t set the clock, the
			PRESS (+/–) TO SET
	Main Menu screen			EXPRESS PROGRAMMING
	appears after an error		PRESS (PROG.) TO END
	message is displayed.
	Refer to page 8 for the Plug & Play procedure or page
	11 for the clock setting procedure.
3	ENTER PLUSCODE NUMBER
	Press the appropriate		VCR PLUS+
	NUMBER keys to enter the
	PlusCode number printed	123
	in the TV listings for the
	TV program you wish to
	record and press OK.
			PRESS NUMBER KEY (0–9)
	If the Guide Channel Set
	screen appears, go to step 4.				THEN (OK)
			PRESS (PROG.) TO END
	If the VCR Plus+ program
	screen appears, go to step 5.

To make corrections, press CANCEL and input the correct PlusCode number.

INPUT RECEIVING CHANNEL NUMBER

4 The Guide Channel Number, which is assigned to the TV or cable station for the PlusCode number that you entered in step 3, will appear automatically on the Guide Channel Set screen. Input the number of the channel on which

the broadcast for the PlusCode number is received on the VCR or cable box using the NUMBER keys, CH 5° or SHUTTLE PLUS %Þ, then press OK.

The Guide Channel Set screen appears only when you input the PlusCode number of a station for which the Guide Channel number has not been set already.