JVC HR-VP653U Access Tuner Set, 14ENINITIALSETTINGScont, Set Receivable Channels, Information

PRESS (MENU) TO END

14ENINITIALSETTINGS(cont.)

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

POWER MENU

CH OK

POWER

1 2 3

2

4 5 6

7 8 9

0 4

CH+/–

1

3 OK

MENU

SHUTTLE PLUS

Set Receivable Channels

	TURN ON THE VCR
1 Press POWER.
	ACCESS MAIN MENU
	SCREEN
2 Press MENU.
	ACCESS TUNER SET
	SCREEN
Move the highlight bar		MAIN MENU
	(arrow) to "TUNER SET" by
3 pressing CH5° or		FUNCTION SET
		=TUNER SET
	SHUTTLE PLUS%Þ, then	INITIAL SET
	press OK or SHUTTLE
	PLUS%.
		PRESS (5,°), THEN (OK)
		PRESS (MENU) TO END
	PERFORM AUTO CHANNEL
	SET
Move the highlight bar		TUNER SET
	(arrow) to "AUTO
4 CHANNEL SET" by		BAND	CATV
		=AUTO CHANNEL SET
	pressing CH5° or	MANUAL CHANNEL SET
	SHUTTLE PLUS%Þ, then
	press OK or SHUTTLE
	PLUS%.
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	● Receivable channels in
	your area are	AUTO CHANNEL SET
	automatically assigned to
	the CH5°(+/–) buttons,
	and non-receivable	SCANNING...
	channels are skipped.

NOTES:

● At the end of Auto Channel Set, “SCAN

COMPLETED” appears on screen.

●If the scan was unsuccessful, “SCAN COMPLETED– NO SIGNAL” appears on screen. Check the connections and start again.

RETURN TO NORMAL

SCREEN

5 Press MENU.

INFORMATION

The VCR detects the band (TV or CATV) and selects the correct band automatically during Auto Channel Set. The selected band will be displayed on the right side of "BAND" on the Tuner Set screen.