JVC HR-VP453U EN19, Activate High-Speed Search, Skip Over Unwanted Sections, Start Search

FF

LAY

REW

1	2	3
		2
4	5	6
7	8	9
	0	4
LAY		SKIP SEARCH
1
		FF
REW
		3
		SHUTTLE PLUS

EN19

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, press FF for forward high- speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still, press and hold FF or REW for over 2 seconds. When released, normal playback resumes.

Skip Search

SKIP OVER UNWANTED

SECTIONS

1 Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a 30-second period of fast- motion playback. Normal playback resumes automatically.

NOTES:

●To return to normal playback during a Skip Search, press PLAY.

●If the Skip Menu screen appears, see page 25.

Index Search

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

START SEARCH

1 While the tape is stopped, press SHUTTLE PLUS ª or £ (Þor %).

ACCESS DISTANT CODE

2 To access a recording 2–9 index codes away, press SHUTTLE PLUS ª or £ ( Þor %) repeatedly until the correct number is displayed on screen (only if SUPERIMPOSE is set to ON (☞ pg. 23). Playback begins automatically when the desired recording is located.

●If necessary press REW or FF when play starts to search visually to find the very beginning of the desired program.

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.