User Manual

TEW-455APBO High Power Wireless Outdoor PoE Access Point

5.2 Access Control List

5.2.1 IP Filter Setup

Allows to create deny or allow rules to filter ingress or egress packets from specific source and/or to destination IP address on wired (LAN) or Wireless (WAN) ports. Filter rules could be used to filter unicast or multicast packets on different protocols as shown in the IP Filter Setup. Important to note that IP filter rules has precedence over Virtual server rules.

Please click on Advance -> IP Filter Setup and follow the below setting.

Source Address/Mask : Enter desired source IP address and netmask; i.e. 192.168.2.10/32.

Source Port : Enter a port or a range of ports as start:end; i.e. port 20:80

Destination Address/Mask : Enter desired destination IP address and netmask; i.e. 192.168.1.10/32

Destination Port : Enter a port or a range of ports as start:end; i.e. port 20:80

In/Out : Applies to Ingress or egress packets

Protocol : Supports TCP, UDP or ICMP.

Listen : Click Yes radial button to match TCP packets only with the SYN flag.

68

Page 71
Image 71
TRENDnet TEW455APBO manual Access Control List, IP Filter Setup