TRENDnet TEW455APBO manual CPE Mode Configuration, System Wireless Advance Utilities Status

User Manual

TEW-455APBO High Power Wireless Outdoor PoE Access Point

Chapter 5. CPE Mode Configuration

When CPE mode is chosen, the system can be configured as a Customer Premises Equipment (CPE). This section provides detailed explanation for users to configure in the CPE mode with help of illustrations. In the CPE mode, functions listed in the table below are also available from the Web-based GUI interface.

OPTION	System	Wireless	Advance	Utilities	Status
	Operating Mode	General Setup	DMZ	Management	System Overview
	WAN	Wireless Profile	IP Filter Setup	Profiles Settings	DHCP Clients
	LAN	Site Survey	MAC Filter Setup	Firmware	Extra Info
				Upgrade
Functions
	DDNS Setup		Virtual Server	Network Utility	Event Log
	Time Server			Reboot
	SNMP
	UPNP

Table 5-1: CPE Mode Functions

5.1 External Network Connection

5.1.1 Network Requirement

It can be used as an Outdoor Customer Premises Equipment (CPE) to receive wireless signal over last mile application, helping WISPs deliver wireless broadband Internet service to residents and business customers. In the CPE mode, TEW-455APBO is a gateway enabled with NAT and DHCP Server functions. The wired clients connected to TEW-455APBO are in different subnet from those connected to Main Base Station, and, in CPE mode, it does not accept wireless association from wireless clients.

Figure 5-1 CPE mode configuration

62