TRENDnet TEW455APBO manual AP Mode Configuration, External Network Connection, Network Requirement

User Manual

TEW-455APBO High Power Wireless Outdoor PoE Access Point

Chapter 3. AP Mode Configuration

When AP mode is chosen, the system can be configured as an Access Point. This section provides detailed explanation for users to configure in the AP mode with help of illustrations. In the AP mode, functions listed in the table below are also available from the Web-based GUI interface.

Option	System	Wireless	Administrator	Status
	Operating Mode	General Settings	Management	System Overview
	LAN	Advanced Settings	Profiles Settings	Clients
Functions
	Time Server	Virtual AP	Firmware Upgrade	WDS Status
	SNMP	WDS Setup	Network Utility	Extra Info
	UPNP		Reboot	Event Log
		Table 3-1: AP Mode Functions

3.1 External Network Connection

3.1.1 Network Requirement

Normally, TEW-455APBO connects to a wired LAN and provides a wireless connection point to associate with wireless client as shown in Figure 3-1. Then, Wireless clients could access to LAN or Internet by associating themselves with TEW-455APBO set in AP mode.

Figure 3-1 Access Point on a Wired LAN Configuration

16