46EN

EDITING(cont.)

Edit From A Camcorder

Recorder

Your VCR

To rear panel PAUSE/AV

COMPULINK connector

 

AUDIO

Mini-plug cable (not supplied)

 

(JVC camcorder only)

VIDEO IN

IN

 

 

 

Audio/Video cable (not supplied)

 

VIDEO OUT

Camcorder

AUDIO OUT

 

EDIT

Player

 

MENU

OK

CH

7 8 9

NUMBER "0"

0

4

 

 

1

OK

MENU

You can use a camcorder as the player and your VCR as the recorder.

MAKE CONNECTIONS

1 Connect an AV cable between the camcorder’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.

When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

If connecting to a camcorder with a monaural output, connect the audio output connector on the camcorder to AUDIO IN L of the VCR.

LOAD A CASSETTE

2 Insert the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT MODE

3 Set to "AUX". Press the NUMBER key “0” and/or CH to select depending on the connector being used – "L-1" for the rear AUDIO/VIDEO IN connector, or "F-1" for the front AUDIO/VIDEO IN connector.

If you’re using a JVC Master Edit Control-equipped camcorder — step 4

If not — step 8

ACCESS MAIN MENU

SCREEN

4 Press MENU.

ACCESS FUNCTION SET SCREEN

5 Press CH or SHUTTLE PLUS to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or SHUTTLE PLUS %.

SHUTTLE PLUS

Page 46
Image 46
JVC HR-VP658U manual Edit From a Camcorder, Access Function SET Screen