JVC HR-VP658U manual Engage Timer Mode

	UMBER	2		3
	1
	"8"			2
		5		6
	4
NUMBER "7"	7	8		9	NUMBER "9"
		0		4	TIMER
PROG.	1
				SP/EP
			3		OK

EN41

8	SET TAPE SPEED
	Press SP/EP to set the tape speed.
	RETURN TO NORMAL
9	SCREEN
	Press PROG. or OK. "PROGRAM COMPLETED"
	appears on the screen for about 5 seconds, then normal
	screen appears.
10	ENGAGE TIMER MODE
	Press TIMER. The VCR turns off automatically and "ä"
	is displayed on the display panel.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 3 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR’s power goes off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable or satellite channels through an external tuner, be sure to keep the cable box or satellite receiver's power ON.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver			PROGRAM 1
(unless "DBS RECEIVER SET" is
set to "OFF" ☞ pg. 20), the			START		STOP
BAND indication (TV or CATV			8:00AM	=	9:00PM
			DATE		CH
or DBS) appears under the
			12/24/98		110	SP
channel number display. If the			THU		DBS
channel number that has been		PRESS (+/–, SP/EP, 8=DAILY,
entered requires that the band		9=WEEKLY, 7=DBS), THEN (0K)
		PRESS (PROG.) TO END
be set, "7=DBS" is displayed
on the screen. Press the NUMBER key "7" to select the
desired band.
a– TV	: To timer-record a regular TV program received
	on the VCR.

b– CATV : To timer-record a cable TV program received on the VCR, or through a cable box (unless "CABLE BOX SET" is set to "OFF" ☞ pg.17).

c– DBS : To timer-record a satellite program received through a DBS receiver.

●If "BAND" is set to "TV" at the Tuner Set screen (☞ pg.14) and "CABLE BOX SET" is set to "OFF" at the Cable Box Set screen (☞pg. 17), CATV will not be displayed on the Program screen; If "BAND" is set to "CATV" or "CABLE BOX SET" is set to "ON", TV will not be displayed.

ATTENTION

If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.

Pattern 1: The program with the lower program number will be recorded.

10:00	11:00	12:00
Program 1	CH10
Program 2			Not recorded
	CH40

Pattern 2: The program that is broadcast earlier will be recorded.

10:00	11:00	12:00
Program 1	CH10
Program 2			Not recorded
	CH40

Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.

10:00	11:00	12:00
Program 1	CH10
	Program 2
			CH40

Not recorded