English
Weekend programming - not possible
Date was incorrectly entered. Daily programming can only be used for recordings from Mondays to Fridays.
Memory full
All the timer blocks are in use.
Solution:
•Delete one of the Timer recordings.
Clock not
The clock is not set. Set it manually (See ‘Time/Date
Data error
Solution:
•Make sure all information is correct and complete.
How to check or alter a Timer Recording
1Press TIMER on the remote control.
2Select ‘Timer list’ with w/v (down or up cursor.)
Timer
Video Plus+ programming
Timer programming
Timer list
To exit
Press TIMER
3Press u (right cursor).
Timer
Timer list
|
|
|
| Rec | |
Date | CH. | Start | End | Mode | |
|
|
|
| ||
04// 20 | 120 | 09:00PM | 11:00PM SP |
| |
07// 20 | 89 | 08:30PM | 09:30PM SP | ||
10// 20 | 65 | 07:00AM | 07:30AM SP | ||
11// 20 | 120 | 09:00PM | 11:00PM SP | ||
| Total record time 05: 30 |
|
| ||
To change |
| To exit |
|
| |
Press |
|
| Press TIMER | ||
4Select the timer recording you want to check or alter with w/v (down or up cursor.)
‰ The selected timer recording will be highlighted in blue.
5Press u (right cursor).
6Select what you want to check or alter with t/u (left or right cursor).
7Alter data with w/v (down or up cursor) or with the digit buttons
8Press OK to conform.
9To end, press TIMER, repeatedly if necessary to remove the menus.
10Switch off the Recorder by pressing ON/OFF on the remote control.
How to clear a timer block
1Press TIMER on the remote control.
2Select ‘Timer list’ with w/v (down or up cursor.)
3 Press u (right cursor).
4 Select the Timer Recording you want to clear with w/v (down or up cursor.) The selected Timer Recording will be highlighted in blue.
5 Press CLEAR.
‰The Recording you selected will appear alone on the screen.
6Confirm with OK.
‰ Timer Cleared will appear at the bottom of the screen briefly. Then the Timer List will reappear.
7Remove the menus by pressing TIMER, repeatedly if necessary.
Note:
If Timer Recordings overlap or conflict with each other, they will be highlighted in red in the Timer List.
How to stop a Time Recording in progress
•A Timer Recording that is already in progress can only be aborted by pressing ON/OFF on the remote control or STANDBY/ON on the front of the Recorder.
42RECORDING
