Philips DVDR1500 warranty Installation, Update/Re-install TV channels, Add and delete TV channels

English

Installation

Installation

Auto ch.programming

Add delete channels

VCR Plus+ ch.

Time Date

To exit press

SYSTEM MENU

Update/Re-install TV channels

After initial installation is complete, it is possible to perform the installation procedure again. If, for example, your cable company adds TV channels, you may wish to update the channel screen.

Note:

All previously stored channels will be erased and replaced.

1In the installation menu, select ’Autoch. programming’ with the w/v (down or up cursor) buttons, then press OK.

‰ Automatic search and installation starts.

’Searching for TV channels,’ the number of channels found so far and ’Please wait’ appear on the TV screen.

‰When Automatic search and installation is complete, ’Auto m.search complete - XXX channels found’ appears on the TV screen.

2Press SYSTEM MENU to return to the previous menu.

Add and delete TV channels

You can add channels that were not installed automatically due to poor reception or delete channels that you find not interesting. To customize the list of channels available:

1In the installation menu, select ’Add/delete channels’ with the w/v (down or up cursor) buttons, then press the u (right cursor).

‰ The channel screen appears, and the cursor is on the first channel.

2Press w (down cursor) as often as required to select the channel to be changed.

3Press t/u (left or right cursor).

‰The selected channel toggles to Add or Del. 4 Press OK to store your choice.

5 Repeat steps 2-4 as often as necessary to add or delete all the channels you want.

6 Press SYSTEM MENU twice to return to the previous menu.

Installation

Add/ delete channel
12	Add
14	Delete
15	Add

17Add

18Delete

21Add

23Add

24Delete

To exit press

SYSTEM MENU

VCR Plus+ ch

If you intend to use the VCR Plus+ programming system, you need to manually assign channel numbers to Guide channel numbers.

Installation

VCR Plus+ ch.

VCR Plus+ ch. Channel

003

004

005

006

007

008

To exit press

SYSTEM MENU

1In the Installation menu select ‘VCR Plus+ ch.’ using the w/v (down or up cursor.) Then press u (right cursor)

2Select a VCR Plus+ Guide channel with w/v (down or up cursor.)

3Enter the correct channel number with t/u (left or right cursor) or 0-9. Refer to a channel mapping list in your newspaper or TV guide. Enter channel numbers as a three-digit number. For example, to enter channel seven, press 0,0,7 or, press 0,1,2 for channel twelve.

4Confirm your selection by pressing OK.

5Press the SYSTEM MENU button twice to return to the previous menu.

36OPERATION