Operation
Important notes for operation
You can switch on the DVD Recorder with the B STANDBY/ON button on the front of the Recorder. Keep your DVD Recorder connected to the power outlet at all times to ensure programmed recordings can be made.
5
You can use the B STANDBY/ON or B ON/OFF button on the remote control to interrupt a function. When you have an operating problem, you can interrupt the function and start again.
Disc types
You will recognize the different types of discs that can be used in your DVD Recorder by the logo. Depending on the disc type you can either use it for recording and playback or playback only. Some discs are not suitable to be used in the DVD Recorder at all.
The following information summarizes existing disc types and their DVD Recorder compatibility.
Discs for recording and playing:
DVD+RW
Records and playing. In case of a new blank disc, after the first recording, some more time (up to two minutes) is needed by the Recorder to automatically make the disc compatible with DVD video players.
English
Loading discs
1Press / OPEN/CLOSE. The disc tray opens.
2Lay your chosen disc in the tray, label side up. If the disc is two side, make sure the label of the side you want to play is facing up.
Make sure it is sitting properly in the correct recess.
3Press / OPEN/CLOSE to close the tray.
‰ ‘READING’ appears on the Recorder display. If the disc is
You can unload a disc by pressing / OPEN/CLOSE again or by pressing or hockling 9 STOP for two seconds.
Note: If ‘Child Lock’ is ‘On’ and the disc inserted is not in the ‘child safe’ list (not authorized), the PIN code must be entered and/or the disc has to be authorized. (see ‘Access Control’)
Discs for playing only:
These play only if they contain
DVD-RW
Plays only if RWit is recorded in Video mode and has been finalized.
CD Digital Audio
You can play digital audio CDs in conventional style through a stereo system, using the buttons on the remote control and/or front panel of the DVD Recorder.
OPERATION 27
