Philips DVDR1500 Connections Front Your DVD Recorder optional, Power supply, Camcorder connection

Step 5: Connections - Front of

your DVD Recorder (optional)

Camcorder connection

•If you have a DV or Digital 8 camcorder, connect the DVD Recorder’s i-link DV input jack on the Recorder (1) to the corresponding output jack on the camcorder using the i-link cable of your camcorder.

•If you have a Hi-8 or S-VHS(C) camcorder, connect the DVD Recorder’s S-VIDEO IN jacks on the DVD Recorder to the corresponding OUT jacks on the camcorder. Use the S-Video cable supplied (2).Then connect the AUDIO Left (white) and Right (red) IN jacks of the DVD Recorder to the corresponding OUT jacks on the camcorder using the AUDIO cable supplied (4).

•Otherwise, connect the VIDEO IN jacks on the DVD Recorder (yellow) to the corresponding OUT jacks on the camcorder. Use the video cable supplied (3). Then connect the AUDIO Left (white) and Right (red) IN jacks of the DVD Recorder to the corresponding OUT jacks on the camcorder using the AUDIO cable supplied (4).

PANEL

1 2 3 4

Camcorderr r

Step 6: Power supply

•Make sure all necessary connections are made before connecting the DVD Recorder to the power supply.

•Plug the supplied power cable into the Power jack on the back of the Recorder.

•Connect the power card to an AC outlet.

Note:

Make sure the local power voltage matches the required 110V.

When the Recorder is in the ‘standby/power off’ position, it is still consuming some power.

If you wish to disconnect your DVD Recorder completely from power, remove the power cord from the AC Outlet.

When the DVD Recorder is disconnected from the power, TV channels and timer data usually will be stored one year.

English

INSTALLATION 17