REMOTE CONTROL
Note: The Remote Controller will not operate properly if strong lightshines on the sensor window of the Air Conditioner or if there are obstacles between the Remote Control and the Air Conditioner.
Every time you push button, you will hear a beep from the Air Conditioner.
POWER
•To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
•This button takes priority over any other buttons.
•When you first turn it on, the unit is in cool mode, High fan speed, Temperature setting at 72°F.
TEMPERATURE SETTING
•This button can automatically control the temperature
of the room. The temperature can be set within a range of 60°F to 86°F by increments of I°F.
FAN SPEED
• Everytime you push this button it advances the setting as | |
follows: {(High(F2) _ Low(F1) _ High(F2)} |
|
ON/OFF TIMER
•Youwill usuallyuse
•If unit is running,Timersets numberof hours until
•For your sleepingcomfort,onceTimer is set, the Temperaturesetting will raise2°F after30 min.,and onceagainafter another30 min.
•Everytime you push Timerbutton, it advancesthe Timer settingas follows: 1 Hour _ 2 Hours _ etc. _ 12Hoursmaximum.
START TIME
•If unit is off, Timersets numberof hoursbefore unit starts.
•Everytime you push Timerbutton, it advancesthe Timer settingas follows: 1 Hour _ 2 Hours _ etc. ) 12Hoursmaximum.
POWEF
• TEMP •
FAN SPEED
TIMER MODE
ENERGY
SAVER
ENERGY SAVER
The fan stops when the compressor stops cooling.
•Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
COOL/FAN
•Everytime you pushthis button, itwill toggle between COOL and FAN.
