FEATURES
7 1
FIG. 13
1.Cabinet
2.Horizontal Air Direction Control Tab
3.Cool Air Discharge
4.Inlet Grille
5.Air Filter
6.Control Board
7.Upper Guide
8.Curtain
9.Remote Control
USING THE AIR CONDITIONER
_Toreduce the risk of fire, electric
shock, or injury to persons, read the important SAFETY instructions section before operating this appliance.
To begin operating the air conditioner after installation, follow these steps:
1.Plug in the air conditioner. (To prevent electrical hazards, do not use an extension cord or an adapter plug.)
2.Set the TEMP control to the lowest number.
3.Set the MODE control to the COOL.
4.Adjust the louvers for comfortable air flow with control tab.
5.Once the room has cooled, adjust the TEMP and FAN SPEED control to the setting you find most comfortable.
NOTE : If the air conditioner is turned off, wait 3 minutes before restarting. This allows pressure inside the compressor to equalize. Failure to wait 3 minutes before restarting may cause inefficient operation.
If you move the TEMP control to a warmer, then immediately back to a cooler setting, the compressor will shut off, although the fan will continue to run. Wait 3 minutes before restarting.
Review the DISPLAY section for other settings. (See page 10)
