JVC HR-VP675U manual Turn on DBS Receiver, Select DBS Receiver, Output Channel

PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

20ENINITIALSETTINGS(cont.)

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

POWER MENU

OK CH

POWER

1 2 3

2

4 5 6

7 8 9

0 4

1

3	OK
MENU

SHUTTLE PLUS

Set DBS Receiver Output

Channel & DBS Receiver

Brand

	TURN ON DBS RECEIVER
	Select a channel other than channel 55, 100 or 205 on
1 your DBS receiver.
2	TURN ON THE VCR
	Press POWER.
	● Set the VCR to the channel (3 or 4 or F-1 or L-1) on
	which the signals from the DBS receiver are received.
	ACCESS MAIN MENU
	SCREEN
3 Press MENU.
	ACCESS INITIAL SET
4	SCREEN
	Press CH5° or SHUTTLE PLUS%Þ to move the
	highlight bar (arrow) to “INITIAL SET”, then press OK or
	SHUTTLE PLUS%.
	ACCESS DBS RECEIVER SET
	SCREEN
	Press CH5° or SHUTTLE	INITIAL SET
	PLUS%Þ to move the
5 highlight bar (arrow) to		CLOCK SET
		LANGUAGE ENGLISH
	“DBS RECEIVER SET”, then	GUIDE CHANNEL SET
	press OK or SHUTTLE	CABLE BOX SET
	PLUS%.	=DBS RECEIVER SET
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	SELECT DBS RECEIVER
	OUTPUT CHANNEL
	Your selection depends on	DBS RECEIVER SET
	how your DBS receiver is
6 connected to your VCR.
		OFF

If your DBS receiver is connected to your VCR using an RF connection . . .

. . . press CH 5° or SHUTTLE PLUS %Þ until the channel number

representing the DBS receiver's output (CH3 – CH4) appears on the screen.

If your DBS receiver is connected to your VCR's FRONT AUDIO/VIDEO IN connectors . . .

. . . press CH 5° or SHUTTLE PLUS %Þ until "ON F-1 (FRONT)" appears on the screen.

If your DBS receiver is connected to your VCR’s REAR AUDIO/VIDEO IN connectors . . .

. . . press CH 5° or SHUTTLE PLUS %Þ until "ON L-1 (REAR)" appears on the screen.