JVC HR-VP682U 12 EN, 82-7 2-7, Setting clock manually, Select D.S.T. mode, Manual Clock Set

12 EN INITIAL SETTINGS (cont.)

8

4–7

SP EP

VCR

4–7

1

82–7

2–7

Setting clock manually

— Manual Clock Set

First follow steps 1 to 3 on page 10, then go to the following steps.

4 OnSetthetimefront panel:		CLOCK SET
	Press CH5° until the
		TIME	DATE YEAR
	desired time appears,
		– –:– –AM	1/ 1	00
	then press OK.	AUTO CLOCK : ON		(CATV)
		HOST CH	: AUTO
	On the Remote:	D.S.T.	: AUTO
	Press SHUTTLE PLUS	TIME ZONE	: AUTO
		PRESS (5,°), THEN (OK)

%Þuntil the desired time PRESS (MENU) TO END

appears, then press OK or SHUTTLE PLUS #.

●Holding CH 5° or SHUTTLE PLUS %Þ changes the time in 30-minute intervals.

●When the time is entered manually, “AUTO CLOCK” is automatically set to “OFF”, and “HOST CH” and “TIME ZONE” disappear.

5SetOn thedatefront panel:

Press CH5° until the desired date appears, then press OK.

On the Remote:

Press SHUTTLE PLUS %Þ until the desired date appears, then press OK or SHUTTLE PLUS #.

●Holding CH 5° or SHUTTLE PLUS %Þ changes the date in 15-day intervals.

6SetOn theyearfront panel:

Press CH5° until the desired year appears, then press OK twice.

On the Remote:

Press SHUTTLE PLUS %Þ until the desired year appears, then press OK or SHUTTLE PLUS #twice.

7Select D.S.T. mode

You can select either “ON” or “OFF”.

ON– Adjustment will be made by the built-in clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

On the front panel:

Press CH5° to select the desired setting.

On the Remote:

Press SHUTTLE PLUS %Þ to select the desired setting.

8StartPress MENUclock and normal screen appears.

To make corrections any time during the process

Press OK or SHUTTLE PLUS # repeatedly until the item you want to change blinks, then press CH 5° or

SHUTTLE PLUS %Þ.